Configuring VFDs in Siemens TIA Portal:
VFD configuration using Siemens TIA Portal, here are the key steps:
Hardware Setup:-
Add the VFD to your TIA Portal hardware configuration.Connect it via Ethernet cables to your Profinet network.
Data Communication:–
Define the data you need to exchange between the PLC and the VFD.Set up communication parameters (frequency setpoints, motor status feedback).
Structured Inputs and Outputs:-
Create User-Defined Types (UDTs) for VFD inputs and outputs.Organize your data efficiently.Remember to check compatibility with your TIA Portal version and install any necessary service packs.